Mobile Power Maintenance Manual

Mobile Power Maintenance Manual The powerful features of mobile power can bring great convenience to your life. The maintenance of mobile power can extend its service life and improve the charging quality. Usually maintenance needs to pay attention to a few details.

1, often use mobile power

Every time a complete charge and discharge is completed for the mobile power. It is best once every month. When it is used for the first time, it can be used directly because the mobile power has been charged to about 50%, and full use is avoided during daily use.

2, avoid falling, especially careful not to squeeze

Products such as electrical appliances have always been irresistible to touch, mobile power is no exception, a small charging treasure is actually a complex cell device, throwing or squeezing at any time may damage the components inside.

3, pay attention to temperature and humidity

Try to avoid storing the mobile power in an environment where the temperature and humidity are too extreme. If the weather is more humid, you can use it more frequently to charge it. This is also a good way to protect it.

4, try not to use full charge to use

Before the mobile power source charges the mobile phone, you must first fully charge the mobile power source. During this process, you should try to avoid that the charge is not completed before it is interrupted, because this will also detract from its life.

Handwheel Encoder

The handheld addresser is used to program the address of the monitoring module offline. When in use, connect the two output wires of the handheld encoder to the communication bus terminal (terminal label 1, 2) of the monitoring module, turn on the black power switch on the right side upwards, and press "ten Add", [Subtract ten", [Add one place" and [Subtract one place" to program the address.

Motion Sensor Photocell Light Control,Sensor For Motion Control,Exterior Motion Sensor Control,Hollow Shaft Encoder

Changchun Guangxing Sensing Technology Co.LTD , https://www.gx-encoder.com