Automotive interior materials atomization test standard analysis (2) - Huaqiang Electronic Network

2025-07-22 13:36:55

Car Audio Crystal 3.2*2.5mm 3225 24M (24.000MHZ) 20PF 10PPM 20PPM 30PPM

Test - uppercase JPG - memory 146K

Kaixin micro test

Test probe P100-M3

There are numerous atomization standards both domestically and internationally, with many companies also establishing their own internal standards based on their quality systems. These varying standards lead to differences in the materials used and the specific parameters required for atomization testing. Here are some key details about these standards:

Width="614" height="267" src="http://i.bosscdn.com/blog/20/17/10/21165956940537.png" />

The reflection coefficient measurement method and the gloss method described in the standard are essentially the same approach. As discussed in a previous article, the early standard used DIDP as a reference reagent in the reflection method (gloss method), while the gravimetric method used DOP, as specified in PV 3015. In more recent standards, both methods have been unified to use DIDP as the reference reagent.

The test conditions required for these methods are generally similar, except for SAE J1756, which does not provide specific results for DIDP. However, the other four standards clearly define the test results for either DIDP or DOP. This consistency helps ensure better comparability and reliability across different testing procedures.

Understanding these standards is crucial for manufacturers and researchers involved in material testing, especially in industries where product performance and safety are of utmost importance.
</div>

<div class=

Share to:

Previous: As part of asphalt fatigue testing machine equipment? - Huaqiang Electronic Network

Next: UV-1100 spectrophotometric method for rapid measurement of peroxide content of oxides in edible oils - Master's thesis - Dissertation

Automotive interior materials atomization test standard analysis (2) - Huaqiang Electronic Network

Related Reading