B0505LM-1W Typical Application Circuit Introduction

MORNSUN's new B0505LM-1W series can be better used in this solution. This 1000VDC mini-isolated, high-reliability DC/DC converter has an input voltage of 5V and an output voltage of 5V. 1W, Figure 1 shows a typical application circuit for this product. Since 1000VDC isolation between input and output is achieved, and the output short-circuit time can last for 1s, it can resist the interference of high-frequency transient surge.

This article refers to the address: http://

B0505LM-1W Typical Application Circuit
Figure 1 B0505LM-1W Typical Application Circuit

MORNSUN improves the reliability of its products by improving its processes. At the same time, quality control is strictly controlled by suppliers in terms of supplier selection and quality control of incoming materials. The internal potting material is made of American resin, and the thermal expansion coefficient is well matched with the internal substrate and the outer casing to improve the reliability of the product and guarantee the quality of the product.

B0505LM-1W can work normally in the temperature range of -40 to +85 °C. The MTBF has increased from 1 million hours of existing products to over 3.5 million hours. The product meets the IEC61373 standard for vibration and shock resistance and is suitable for industrial vibration and shock applications. At the same time, the lead-free production process has been implemented to meet the RoHS directives.

The volume of the B0505LM-1W product is: 16.5*5.9*7.5MM. This high-reliability DC/DC converter is 1/7 shorter than the previous generation and 40% smaller. The product is small in size, light in weight and strong in anti-pushing ability, and better meets the strict requirements on volume, weight and portability in the applicable field. This product is suitable for small current isolation and DC voltage conversion, such as intelligent instrumentation, industrial control circuit, bus, power monitoring system and other fields.

Gas Bbq Grill

Gas burner principle

The general use of stainless steel as the furnace material, through the electronic pulse ignition, the use of oil liquefied petroleum gas or natural gas combustion, heat to heat the above four independent high temperature crystal red gas heating plate and then baking food on the iron plate. With the energy-saving component control, the electronic pulse switch can also control the size of the flames to control the temperature of the iron plate, practical and convenient.

Gas BBQ Grill

Barbecue Grill, Gas Stove Burner, Windproof Camping Portable Stove, Gas Bbq Grill

Ningbo APG Machine(appliance)Co.,Ltd , http://www.apgelectrical.com